-
上海贵傲电子科技有限公司
主营：美国GE露点仪,德国UWT料位计,德国Lorenz扭矩传感器,AGAR灯丝,日本CIS工业相机
上海贵傲电子科技有限公司
主营：美国GE露点仪,德国UWT料位计,德国Lorenz扭矩传感器,AGAR灯丝,日本CIS工业相机
8
The TERA - Ohm Meter TOM 600 works with the current-voltage measuring process.
To the adaptation to international norms (IEC) EN, DIN, VDE i.e.) you can select the measuring
time with an internal timer. The measuring voltage can be selected automatically or manually.
An internal EEPROM memory can save up to 99 measured values. With an Excel software you can read out and control the TOM 600.
Measuring range
10 kΩ... 2 TΩ
( 104....1012Ω)
tolerance: ± 1 x 10n
Measuring voltages
< 200kΩ = 10V
> 200kΩ = 100V
Specifications
| Dimensions: | 200mm x 100mm x 40mm (L x W x H) |
| Weight: | approx. 380g (without batteries) |
|
Display: |
Alphanumeric display (2 rows x 16 digits), indicator panel 60mm x 15mm |
|
PC-Interface: |
USB - Interface with small USB Socket
|
|
Power supply: |
4 pc. AA cells, 2100mAh. (permanent supervised) operating time approx. 6h with fully charged cells, external with mains adapter 9V DC / 300mA |
| Charging time: | max. 14h |
| Power comsumption: | max. 100mA |
| Auto Switch Off: | approx. 5min after the measurement, when no button pressed |
Scope of delivery TOM-600
The electro fieldmeter EFM 022 is very user friendly due to its compact design and one touch operating. The dissipative housing of the unit is EPA - compatible.
Menu driven selection of measurement distance
Voltage potentials can be directly measured for preselected measurement distances, thus would avoid recalculation. 5 measurement distances are available, which makes it even possible for your most convenient handling in problematic areas.
Hold function
The hold function keeps the actual reading in memory, e.g. after obtaining measurements in spots where the on-line reading of display is not possible.
No zero drift
Therefore a zero adjustment is not needed before each measurement.
| distance 1cm: | 0 to 8kV |
| distance 2cm: | 0 to 16kV |
| distance 5cm: | 0 to 40kV |
| distance 10cm: | 0 to 80kV |
| distance 20cm: | 0 to 160kV |
| Dimensions: | 122mm x 70mm x 26mm ( L x W x H ) |
| Weight: | approx. 130 g (without battery) |
| Power supply: | 9V Alkali battery IEC 6F22 |
|
Display:
|
2-line alphanumeric LC-display with 12 digits each The measurement distance in cm will be displayed in the first line, the voltage potential will be indicated in volts in the second line. |
| Scope of delivery: |
|
|
The EFM 113B is a small and handy electro field meter with a high sensitivity designed for the measurement of dc fields and static charges according to the fieldmill influence principle. Analog current output (±1mA).
Specifications:
| Dimensions: | 120mm x 40mm (l x d) |
| Measuring range: | 5kV/m, 20kV/m, 50kV/m und 200kV/m |
| Metering precision: | 5% in a homogenous field |
|
Calibration: |
In the homogenous field of a plate capacitor plate size 200mm x 200mm, plate distance 25mm modulator system mounted centered in the plate |
| Power supply: | 9-15V DC / 80mA |
| Interface: | Analog current output ?1mA |
|
Mounting: |
Alumonium clamping yoke with photo thread (optional) |
| Operating time: | In one shift operation min. 2 years |
Small and handy electro field meter with 21 figure LED row with smooth transition. This provides a scale-reading precision of approx. 5%.
Special features:Walking Test according to DIN 61340-4-5
Together with the optional pico software, the hand-held electrode and the gage head MK11 S2 a walking test according to DIN 61340-4-5 can be performed.
Specifications:
| Measuring range: | ± 20 kV/m, ± 200 kV/m, ± 2 MV/m |
| Dimensions: | 100mm x 80mm x 38mm (l x w x h) |
| Weight: | Approx. 370g |
|
Writer output: |
± 1V / Ri >1kΩ |
With the EFM 122 you can measure the potential of an object in Volt over a pre-selectable distance between the electrode and the measuring object. Charges and fields of positive and negative polarity can be located and measured. You can select the measuring distance between 1cm, 2cm, 5cm, 10cm and 20cm. The integrated micro controller converts the measured field intensity automatically to the charge of an equivalent potential in Volt. Potentials higher than 1000V are displayed in kV. The handy design with separate measuring electrode and the data latching feature enable measuring at places where you have concentrate on positioning the electrode for safety reasons.
Please Note: This instrument includes only a serial Interface with a simple DOS Software. To use at a PC we prefer one of our other instruments with analoque Interface ±1V and our UAC 110 wit the ReadOut Software !!
Specifications:
|
Dimensions: |
Hand-held unit: 70mm x 122mm x 26mm (L x W x H) Gage head: ? 36mm x 136mm |
|
Weight: |
Hand-held unit 130 g (without storage battery), gage head 190 g |
|
Power supply: |
9V NiMH storage battery with charger DC 12 V |
|
Measuring ranges: |
distance 1 cm : 0.....10 kV max. resolution 1 V distance 2 cm : 0.....20 kV max. resolution 2 V distance 5 cm : 0.....50 kV max. resolution 10 V distance 10 cm : 0...100 kV max. resolution 10 V distance 20 cm : 0...200 kV max. resolution 20 V |
| Display: | Double spaced alphanumeric 12-digit LCD display |
| Operating time: |
Approx. 2 Std. in battery mode |
|
Calibration: |
In homogenous field of a plate capacitor, plate size 100mm x 100mm, plate distance 20mm, modulator system mounted centered |
Scope of delivery
Small electro fieldmeter for the permanent control and the measuring of electrostatic DC-fields and electrostatic charges with high sensitivity, using the fieldmill influence principle.
Serial RS485 bus system for up to 16 EFM 125. (8 Bit data protocol)
Specifications:
| Dimensions: | 120mm x 40mm (l x d) |
| Measuring range: | 5kV/m, 20kV/m, 50kV/m und 200kV/m |
| Metering precision: | ± 5% in an homogenous field |
|
Calibration: |
In homogenous field of a plate capacitor plate size 200mm x 200mm, plate distance 25mm modulator system mounted centered in the plate |
| Power supply: | 9-15V DC / 80mA |
| Interface: | Serial RS485 Bus |
|
Mounting: |
Aluminium clamping yoke with photo thread (optional) |
| Operating time: | In one shift operation min. 2 years |
High quality, precise, handheld electro fieldmeter. The incorporated micro-computer provides high operating comfort and ensures safe operating.
Features
Measuring ranges
± 2 kV/m
±20 kV/m
±200 kV/m
Specifications:
| Dimensions: | 180mm x 73mm x 178mm (L X W X H) |
| Weight: | Approx. 820g |
| Display: | Analog device -2..0..+2 Kl. 1,5 |
| Calibration accuracy: | ±2% |
|
Output **: |
±1V analog output (Ri> 1kΩ) and serial RS232 interface |
High quality, precise, handheld Electro-Fieldmeter. The incorporated micro-computer provides high operating comfort and ensures safe operating.
Features
| Dimensions: | 180mm x 73mm x 178mm (L X W X H) |
| Weight: | Approx. 820g |
| Display: | Analog device -2..0..+2 Kl. 1,5 |
| Calibration accuracy: | ±2% |
|
Output **: |
±1V analog output (Ri> 1kΩ) and serial RS232 interface |
| EFM 022 | 静电测试仪器 |
| EFM 113B | 静电测试仪器 |
| EFM 120 | 静电测试仪器 |
| EFM 122 | 静电测试仪器 |
| EFM 125 | 静电测试仪器 |
| EFM 231 | 静电测试仪器 |
| EFM 251 | 静电测试仪器 |
| CPS 022 | 静电测试仪器 |
| CPM 374 | 静电测试仪器 |
| TOM 374 | 静电测试仪器 |
| TOM 600 | 静电测试仪器 |
| PGT 50 | 静电测试仪器 |
| PMS 300 | 静电测试仪器 |
| SST 200 | 静电测试仪器 |
| WST 50 | 静电测试仪器 |
| WST 100 | 静电测试仪器 |